-

Improved the focusing accuracy when using the EC-20 Teleconverter.

E-1 Firmware Ver1.4 has incorporated the following upgrade.

-

The S-AF speed in low luminance conditions has been improved.

-

AF accuracy under fluorescent lighting has been improved.

-

Images shot with the E-300 (TIFF, RAW, SHQ) can be displayed normally.

-

New high speed CompactFlash cards are supported.

E-1 Firmware Ver1.3 has incorporated the following upgrade.

-

A communication error rarely occurred when the lens opening value of E-1 was changed using the Camera Control Function of OLYMPUS Studio installed on a personal computer. This problem was solved.

E-1 Firmware Ver1.2 has incorporated the following upgrade.

-

It is now possible to shoot photos by fully pressing the shutter button repeatedly, while keeping the shutter button halfway depressed. This improvement allows you to continually shoot photos in C_AF mode, continuing C_AF with the shutter button halfway depressed.

It is now possible to display the focus points for 3-point AF on Finder's LCD.

E-1 Firmware Ver1.1 has incorporated the following upgrade.

-

Allows higher sharpness setting values (+4, +5).

Improves the exposure precision during macro shooting with flash in the P (Program) mode.

-

Reduces the time it takes for the camera to recover from the sleep mode.

-

"Erasing selected frames" has been updated to enable you to cancel several frames selected for erasure at the same time. This is effective when ERASE SETTING is set to NO.
After you select frames to erase, the SEL. IMAGE screen will appear if you press the arrow pad to go to the next screen or rotate the main dial to change the number of frames in the index. If you select RESET and press the OK button, all frames selected for erasure will be canceled at the same time.
You cannot go to the next screen or change the number of frames in the index unless you erase the pictures or cancel your selection.