1. Check that the camera is off.

    • If the camera is on, press the ON/OFF button to turn it off.

  2. Remove the rear cap of the lens and the body cap of the camera.

    Rear cap

  3. Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body.

    Lens attachment mark

  4. Rotate the lens clockwise until you hear it click (direction indicated by arrow 3).

  • Do not press the lens release button.
  • Do not touch internal portions of the camera.

Removing the lens cap

Removing the lens from the camera

Make sure the camera is turned off when removing the lens. While pressing the lens release button, rotate the lens in the direction of the arrow.

Lens release button

Interchangeable lenses

Read “Interchangeable lenses”.

gInterchangeable lenses