[Keystone Compensation]

Keystone compensation not applied

Keystone compensation applied

Correct the effects of perspective in photos of buildings or landscapes.

  1. Rotate the mode dial to Z.

  2. Use HI to select [Keystone Compensation], then press the Q button.

  3. Make the vertical adjustment while viewing the effect in the display and frame the shot.

    • Use the control dial to choose the compensation amount.
    • Use FG to choose the area to be recorded. Depending on the compensation amount, you may be unable to choose the area recorded.
    • Press and hold the Q button to cancel any changes.

  4. Press the INFO button and then make the horizontal adjustment and frame the shot.

    • Use the control dial to choose the compensation amount.
    • Use HI to choose the area to be recorded. Depending on the compensation amount, you may be unable to choose the area recorded.
    • Press and hold the Q button to cancel any changes.
    • Press the INFO button to toggle between the vertical (Step 3) and horizontal (Step 4) adjustment displays as desired.

  5. Press the shutter button halfway down to focus.

    • If the focus indicator blinks, the camera is not in focus.

  6. Press the shutter button all the way down to shoot.

  • As the compensation amount increases:

    • The image will become coarser
    • The zoom ratio of the crop will increase
    • It will no longer be possible to reposition the crop in both the vertical and horizontal displays
  • Photos are recorded in RAW+JPEG format when [RAW] is selected for image quality.
  • The desired results may not be obtained with converter lenses.
  • Depending on the amount of correction, some AF targets may be outside the display area. An icon (g, h, i or j) is displayed when the camera focuses on an AF target outside the display area.

  • If a focus distance is selected for [Image Stabilizer], the correction will be adjusted for the selected focus distance. Except when using a Micro Four Thirds or Four Thirds lens, choose a focal length using the [Image Stabilizer] option.

    gReducing camera shake (Image Stabilizer)

  • You can not use the # (I) button and jY (G) button for flash mode or continuous/self-timer mode selection while making keystone compensation adjustments. Use the LV super control panel instead.

    gCalling shooting options