A variety of effects can be added to movies. You can also zoom in on a selected area of the frame without zooming the lens.

1. Rotate the mode dial to n.

   

2. Use HI to select [Standard], then press the Q button.

   • Use live controls to choose from a movie quality (frame size and rate) options.

     gSelecting image quality (Movie quality, nK)

3. Press the button to begin recording.

4. Tap the on-screen icon of the effect you wish to use.

   

   Movie effect

   • Tap the display to add effects during shooting.
   • Some effects can be added by tapping the display before starting recording.

   W Art Fade

   Films with the selected picture mode effect. The fade effect is applied to the transition between scenes.

   M Old Film

   Randomly applies damage and dust-like noise similar to old movies.

   U Multi Echo

   Applies an after-image effect. After-images will appear behind moving objects.

   T One Shot Echo

   A ghost of the image displayed when the icon is tapped persists for a short while, disappearing with the passage of time.

   X Movie Tele-converter

   Zooms in on an area of the image without using the lens zoom. The selected position of the image can be zoomed in even while the camera is kept fixed.

5. Press the button again to end recording.

• The INFO button also controls the display of shooting information during movie recording. Note, however, that pressing the INFO button during recording cancels all movie effects except art fade and movie tele-converter.

Applying Effects

Art Fade

Tap the icon. The effect will be applied gradually when you tap the icon of a picture mode.

• Movies shot in partial color use the color selected in ART mode.

Old Film

Tap the icon for the effect to be applied. Tap again to cancel the effect.

Multi Echo

Tap the icon for the effect to be applied. Tap again to cancel the effect.

One Shot Echo

Each tap of the icon adds the effect.

Movie Tele-converter

1. Tap the icon to display the zoom frame.

   

   • You can change the position of the zoom frame by tapping the screen or using FGHI.
   • Press and hold the Q button to return the zoom frame to a central position.

2. Tap M to zoom in on the area in the zoom frame.

   • Tap N to return to the zoom frame display.

3. Tap O or press the Q button to cancel the zoom frame and exit Movie Tele-converter mode.

• Movie Tele-converter is not available in self-portrait mode.
• The 2 effects cannot be applied simultaneously.
• Some effects may not be available depending on the picture mode.
• The frame rate may drop if an art filter or a movie effect is used.